• ስልክ: +86 13380685544
  • ኢ-ሜይል: hinew@hinew-cn.com
    • facebook
    • googleplus
    • LinkedIn
    • Twitter
    • youtube

    inline fuse holder,waterproof,6.3A | HINEW-H3-75

    አጭር መግለጫ:

    fuse holder inline,waterproof inline fuse holder,inline fuse holder 30 amp;Excellent product performance, stable performance, factory direct sales


  • Cheap fuse holder panel mount:
  • Well and High Quality Control:
  • Prompt Delivery:
  • Customer’s Designs and Logos are Welcome:
  • Competitive Prices:
  • የምርት ዝርዝር

    በየጥ

    የምርት መለያዎች

    1. Product Name:ፊውዝ ያዥ / ፊውዝ መሠረት / ፊውዝ ሣጥን / በእርሳስ ፊውዝ ባለቤት;
    2. model:H3-75
    3. ቮልቴጅ መፈራረስ: AC1500 1minute 
    4. insulation resistance:DC 500V 100MΩ Min
    5. ደረጃ መስጠት: 10A 250VDC
    6. Temperature tolerance:-30 ° C -150 ° C
    7. Standard:IEC-60335-1 GB_9364.6-2001
    8. Certification:ISO9001, ROHS,
    9. Mounting Ways:Lead type 
    10. Material:Thermosetting silicone
    11. Fuse size:5*20mm
    12. መተግበሪያ: ሁሉም መኪና, መታጠብ ማሽኖች, ማቀዝቀዣ, ኦዲዮ እና ሌሎች equipmen ተፈጻሚ t

    H3-75

    H3-75-1

    How to install an inline fuse holder and how to crimp battery cables for your power inverter

    Related Information

    What are fuse holders for


  • የቀድሞው:
  • ቀጣይ:

  • What is inline fuse holder?

    Inline fuse holder (used for connection of small household appliances and wiring harness of industrial machinery);

    Inline simply means that the holder for the fuse is fitted into a cable, rather than inside a piece of equipment.

    All fuses are essentially in line because they are in series to work properly and interrupt current when triggered by excess current.

    How to test fuse holder

    Judging criteria for fuse holder:

    According to the rated current for one hour, the fuse will not fuse.

    According to the rated current energized, the fuse holder temperature rise less than 75 degrees

    The fuse will be blown out in a minute when the rated current of the fuse is turned on

    In addition to the rated short circuit capacity, will not continue to occur flashover and ignition

    We test according to the above criteria, and we will introduce some of them

    Detection method:

    Temperature and voltage detection:

    (1)Use the power supply to pass the current and voltage to the fuse holder, keep the voltage at 220V, and the current is supplied from 2A, after each 4-5 minutes to increase the current 2a-10a, rated current when the temperature rise is less than 75 degrees.

    (2) circuit breaker time test,

    The use of stopwatch to record and observe, in the fuse seat through twice the rated current and up the current flow, the fuse to fuse the time needed to fuse, through twice the rated current, the fuse needs to fuse in a minute, and take a fuse before and after the photo

    (3) fuse sample test

    Three fuses of the same specification are provided, providing twice the rated current and other current, respectively, to calculate the average fusing time.

    In this way, we have completed the test of a fuse holder. According to the comparison between the experimental result and the expected result, we can get the result, whether the fuse holder has passed the test and whether it meets the standard.

  • 
    WhatsApp Online Chat !