How to Replace the Fuse Holder in a Fuse Box | Hinew Fuse Box

Steps 1

  • Turn off the main power to the fuse box
  • This is typically located in a separate box near the fuse panel. 
  • Pull the large lever switch to the down position to turn it off. 
  • Test a few lights to make sure the power is off before continuing with your repair.

Steps 2

  • Remove the fuse from the affected socket, which may be burned, or look melted around the edges. 
  • Use pliers if required to twist the fuse out counterclockwise.

Steps 3

  • Locate the single small slotted screw in the bottom of the socket.
  • If the socket is charred, use a flashlight for better visibility.
  • Use a standard screwdriver to remove this screw, turning it counterclockwise until it drops from its hole into the socket. 
  • Keep the screw and reuse it.

Steps 4

  • Pull the socket out of the panel with pliers, to expose the wires behind. Pull the socket our far enough to twist it around to see the rear of it. 
  • Use the screwdriver to loosen the two screws holding the wires to the back of the socket.

Steps 5

  • Wrap the wires around the screws of the new socket. 
  • Push the wires back into the hole and fit the socket into place.
  • Insert the mounting screw into the hole in the socket and turn it clockwise to tighten it.

Steps 6

  • Replace the fuse with a new fuse and restore the main power.
  • Test the light, or outlet connected to the new socket to ensure proper operation.
  • If the fuse pops or the problem persists, consult an electrician to ensure proper repairs are made to maintain safety.

You May Also Like

https://www.hzhinew.com/china-supplier-automotive-micro-fuse-holder-fuse-holder-fuse-box-h3-10ah3-10b-hinew-electric.html

CHINA SUPPLIER AUTOMOTIVE MICRO FUSE HOLDER – FUSE HOLDER/ FUSE BOX H3-10A,H3-10B – HINEW ELECTRIC

https://www.hzhinew.com/oemodm-manufacturer-automotive-fuse-block-fuse-holder-fuse-box-h3-60ah3-60b-hinew-electric.html

OEM/ODM MANUFACTURER AUTOMOTIVE FUSE BLOCK – FUSE HOLDER/ FUSE BOX H3-60A,H3-60B. – HINEW ELECTRIC

https://www.hzhinew.com/fuse-holder-fuse-box-h3-56ah3-56b.html

FUSE HOLDER/ FUSE BOX 5*20mm

https://www.hzhinew.com/fuse-holder-fuse-box-h3-78.html

FUSE HOLDER/ FUSE BOX 5*20mm

 

 


Post time: Sep-20-2018