Function of fuse holder | HINEW

Fuse holder manufacturer

Fuse seat refers to the seat used to install fuses, fuse seats can be divided into: panel-mounted fuse seats, PCB-mounted fuse seats, lead-type fuse seats, guide rail fuse seats, and automobile fuse seats.

Common types of fuse holder

1. Divided by installation type

It can be divided into two types: the safety seat and the safety seat. The safety seat can be known from the name. It presents a tubular fuse seat, which is mainly erected when installed. The insurance holder is installed in the way of patch installation.

2. Divided according to fuse size

Can be divided into large fuse seat, medium fuse seat and small fuse seat these three types. The current used by different electrical appliances is different, the use of non-size fuses can play a different degree of current barrier effect. Different specifications, the size of the natural fuse will be different, so there are three types of fuse seats mentioned above.

3. Divide according to material

It is divided into plastic fuse seat and Bakelite fuse seat, which are the two most widely used in daily life. As the name implies, the fuse holder uses different materials and is used in different scenarios.

Function of fuse holder

1. Have protective function

The primary function of the fuse seat is the protection function, which plays a certain role in the need to protect electrical appliances and fuses. Generally speaking, the rated current of the fuse is higher than that of the normal use of electrical appliances, and it also has a certain overload capacity. However, if the current margin is too large, it will cause the protective effect of the fuse. At this time, the fuse seat plays its protective role and acts as a fuse.

2. It has load bearing function

It was mentioned at the beginning that the fuse holder is an accessory used to place the fuse. Put all kinds of fuses on the fuse holder in a certain order, so as not to disturb the function of each fuse. At the same time, because it is a special place to place the fuse, it provides considerable convenience for the follow-up search and maintenance. For this reason, it can be said that the fuse seat has a bearing function, and is convenient for follow-up use and maintenance.

The above is the functional introduction of the fuse holder. If you want to know more about the fuse holder, please feel free to contact us.

You May Like


Post time: May-19-2022